


Decina Alegra Freestanding Spa Bath (12 Jets) 1700mm White AG1700BTWCNW
Decina Alegra Freestanding Spa Bath (12 Jets) 1700mm White AG1700BTWCNW
Specification Sheet (Click here)
**SPECIAL ORDER 4-5 Weeks Production (Subject to change)**
Non-Refundable
This luxury spa bath has beautiful curved edges and is designed to sit flush up against a bathroom wall with the pump mounted through the wall, either outside, or in an adjoining room. Operated by a rim mounted touch pad, the Alegra Spa Bath has generous reclining lumbar supports, with a centre waste making it perfect for dual bathing.
- Made in Australia
- Australian Standard 1172.5:2019
- Adjustable self-supporting feet
- Lumbar support
- 4 x flush C-Lenda™ centro jets
- 8 x flush C-Lenda™ mini jet
- 1 x flush C-Lenda™ suction
- 1 x rim mounted Sensa-Touch Pad Control
- 750 watt 3-stage Heat Boost Pump
- Suitable for dual bathing
- Comes with overflow as standard and an in-line waste connection with built in connector pipe
Colour: High gloss white
Material: Premium sanitary grade acrylic
Length: 1700mm
Width: 800mm
Height: 590mm
Capacity: 175L [200mm below the bath rim]
Bath Type: Back-to-wall freestanding
Waste Position: Centre Net Weight: 65kg
Heat Boost Pump 6109
Voltage 240W
Power 750W
Heater 700W
Current 7.5A
Flow Rate 350LPM
The Alegra freestanding spa bath is supplied fully plumbed & with a 10AMP, 50HZ, 240V pump fitted with a 3-pin power plug. It will be required to either be hardwired or plugged into a suitable power point. For further guidance on the location of the power point & any other electrical requirements, please discuss with your licensed electrician. Electrical installation must comply with AS:3000 - electrical wiring rules. Please note for any future maintenance on the spa bath, the waste will need to be disconnected and bath removed.